Español
Horticutral Lighting
Client request
My client told me about a project where they need to light up the perimeter of a building. They will put poles on the fence; the total length of the fence is about 600m. The poles will be 5 meters high and each led flood light should be 200W. This installation needs to work at 30% of the light output, and when someone goes near the fence the light should go up to 100%. In the morning, the lights should be off.
What they need from AGC is the LED Flood lights and the solution to manage the lights with the installation as I explain it above.
Wait for your suggestions.
AGC solutions
Sure, our engineer prepared an AN-5-3 motion sensor to be installed in FL23 FLOOD LIGHT.
Like below pictures to meet your project needs.
It can work at 30% of the light output, and when someone goes near the fence, the light should go up to 100%. In the morning, the lights can be off.
Below are the remote’s settings for the sensor before shipment.
You can set the mode by yourselves according to following instructions.
If you have any special requirements for flood light projects, AGC team will be here to help you. Feel free to contact us.
Related video:
